You can print any image from solvent inkjet plotter printer and transfer on any surface of ceramic, wood, steel, etc.   Use water when you apply it on. 
It is new and good for sign board, interior, windows and  glass decoration. (transparent image is possible)  

1. Control the plotter carefully and find best condition for the paper.
   
2. Print your image on glossy surface the paper.
   
3. Cut off the image as you desired.
   
4. Put the paper in warm water and wait for a minute.
   
5. Slide off the coating film from the back paper and place it on the surface of object and flat it on. You can control the place of picture easily by moving around.
   
6. Once you set the place,rub off the water under the paper with soft rubber knife carefully. After you find the water was gone completely, dry it at about 120 Centigrade for an hour.
7. And then, you can put clear polyurethan coating on it to make better strength and better gloss.

Contact us by mail any time

-14.5" x 30meters Roll Type
-24" x 30meters Roll Type.
-39" x 30meters Roll Type.